Menu
358 mesh fence also called high-security fencing, 358 mesh, clear view fence, and anti-climb mesh fencing is widely used in industrial and commercial properties and military sites. Here we list 10 benefits of the 358 mesh fence as below:
The wire diameter is very important to the whole mesh fence, there are thousands of low carbon steel wires welded into a whole mesh fence.
Our 358 mesh fence has many horizontal wires and vertical wires to weld one mesh fencing. All the wires are made of low carbon steel materials, the low carbon steel wire is soft and low strength, but after our special production process, the low carbon steel will be high-grade steel, it will be weld strength to make the strong welded mesh panel.
Our 358 mesh fence normally uses the 4mm horizontal wires and vertical wires to the whole mesh fencing, and it is flat panels. If you make the 3mm horizontal wire and 4mm vertical wire, we normally called a clear view fence, if like this, the whole high-security fence will need to make the curve to weld maximum strength.
358 mesh fence opening will be 76.2mm x 12.7mm, this type of small aperture is anti-cutting, anti-climbing, anti-wire cutters, and secure perimeter protection to provide maximum visibility.
The 4mm high strength wire diameter comes with a 76.2mm x 12.7mm mesh opening that will be more anti-cut. And the fingers can not come through, so it will also be anti-climb. This type of anti-climbing mesh size is the most standard in the market.
Normally the 358 mesh fence use galvanized wire and then powder coated, and the powder coating is also called polymer powder coating.
358 mesh fence also made by the galvanized then PVC powder coating.
We can customized green or black colors or more colors to meet your requirements.
If you will install the 358 mesh fence near the sea, usually within 1 kilometer of the beach, we will recommend the hot dip galvanized, this type of surface treatment will more corrosion resistance.
And if you have more budget, we will recommend hot dipped galvanized then PVC powder painting, this type of 358 mesh fence is welded after hot dipped galvanized then powder coating, this type is the highest quality for corrosion from weather or seawater.
We normally use the square 60mmx60mm post for the anti-climb fence.
And all the posts will come with metal caps or plastic caps to anti-rain. And the post cap is also important for the posts.
If your floor is soil, you will need to bury the post underground, the buried length will be about 0.5m~ 1m. If your floor is concrete, you will need to weld the base plate on the post, this post plate thickness will be 10mm, and the size will vary from the base plate sizes, then you use the expansion screws to install the post on the concrete floor.
A 2m height fence is standard, and we also can make other heights 1m to 6m as your request. The width can be 2.2m to 3m, if the height is 2.2m, the width can be 2.5m to 2.9m to maximum use of the container space.
If the height is 2.4m, the wide can be 2.2m to fit into the container, because the container width is 2.3m, or if we do the wide 2.4m, the whole panel size will be 2.4m height by 2.4m width, the fence panel will sit on the wooden pallets. And it only can fit into the 40ft container.
We can customize different panel sizes as the customer request, or if you have the drawing, we also can customize it as per your request.
If you want more security for the 358 mesh fence, we can add the barbed wire and razor wire on the fence top to give you more security.
The barbed wire and concertina wire can make the fence anti-climb, and anti-cut is ideally suitable for your properties.
The standard barbed inner wire is 2.2mm and the barbed wire is 2mm, the barbed spacing is 125mm.
The concertina razor wires’ standard outer diameter is 450mm, we normally use the BTO-22.
We normally use the metal flat bar and anti-theft bolts and nuts to connect the flat 358 mesh fence, but this type of cost is higher, so we also use the metal clips to install the fence panel.
If you need to install the anti-climb fence on the corner, we also can supply the corner clamp.
Anyway, the flat bar and metal clip will be the best choice to connect the fence panel and posts.
We normally use the 4mm wire as the standard and the mesh opening 76.2mm by 12.7mm, this type of cost is higher than the normal 50mm by 200mm welded mesh fence, but it is more secure.
If you want a more economy anti-climb fence, we can do the horizontal wire 3mm and the vertical 4mm, the cost can be a little lower.
And also can do 25mm by 75mm mesh size to give you a lower cost.
Then we also will make the metal pallets then put the plastic film outside to protect the 358 mesh fence surface finished and not scratched.
when we make the transportation. So the package also needs cost.
We produce different mesh fence panel sizes as the customer requested.
With all the smaller mesh fences welded by the machine, it will be faster to delivery the goods.
Our factory is located in Anping county wire mesh industrial zone, we produce a potential life span of 358 mesh fences, welcome to call 0086 15226711080 or E-mail us at sales@metalfencechina.com for long service life.
The 358 security fencing mostly installed on the Industrial area, residential area, and warehouse area etc.
High Security Fence Designer For Your Property In China.Dedicated to providing high quality and affordable manufacturing services since 2009.
Note: Your email information will be kept strictly confidential.
We will contact you within 1 working day, please pay attention to the email with the suffix”@fenceed.com”.