Steel Board Fence Installation Steps

Thank you for purchasing our Steel Board Fencing. Manufactured to a high standard, if used according to these instructions for installation, and properly maintained, give you years of trouble free performance.

Important Notice

 PLEASE READ THESE INSTRUCTIONS CAREFULLY.  USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE

FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

3 Rail Steel Ranch Fence
SBF-001: 3 Rails Steel Board Fencing

Safety before Install the Steel Board Fencing

 1.1 Use protective gloves, footwear and goggles for assembly and transport the Steel Board Fencing.

1. Instruction of the Metal Horse Fence Panel

    2.1 Specifications—Rails 

  1. Oval Rail Size: 42mm x115mm x 1.5mm
  2. Length: 2.9m                                                                                              2.2 Specifications—Posts
  1. Square Post Size: 80mm x80mm x 2mm
  2. Length: 2.4m                                                          

2. Installation accessories

2.3 Steel Wires, Rubber, Post cap

3. Installation Steps of Steel Ranch Fencing

STEP 1: PLAN & MARK THE FENCE LINE

  1. Walk the property to determine fence route.
  2. Use stakes and string to mark the centerline.
  3. Mark post locations every 2.9m.
  4. Check for underground utilities before digging.

STEP 2: DIG POST HOLES

  1. Dig holes based on the post dimension.
  2. For rocky soil, consider using a post driver or hiring equipment.

Tip: In loose soil, dig deeper or add concrete for stability.

STEP 3: INSTALL POSTS

  1. Place post in hole. Use level to ensure it’s plumb (vertical).
  2. Temporarily brace post with wood or stakes.
  3. Mix concrete (if using) — pour into hole, then insert post.
  4. Allow concrete to cure 24–48 hours (check concrete manufacturer’s instructions).

STEP 4: ATTACH RAILS TO POSTS

  1. Each post has pre-drilled holes for rails.
  2. Put the rubber in the holes.
  3. Slide top rail into upper hole, middle rail into middle hole, bottom rail into lower hole.
  4. Put the steel wires into the post.
  5. Put the post cap and tight it.
  6. Ensure rails are level and evenly spaced.
  7. Repeat for each section.

STEP 5: CHECK ALIGNMENT & STABILITY

  1. Walk along fence line — check for sagging or uneven rails.
  2. Re-check post plumbness.

CUSTOMER SUPPORT

For questions, or customization:

Call: 0086 15076849021

Email: sales@metlafencechina.com

Website: www. fenceed.com

Boot Your Business with Our High Quality Services

The Installation Guide to Save Your Ton of Time

  • Totally free for installation guide
  • Save your ton of time to research
  • Written by a experienced engineer

Note: Your email information will be kept strictly confidential.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix”@fenceed.com”.